language
中国
韩国
韩国
韩国
韩国
韩国
11 11
12 12
13 13
14 14
15 15
16 16
17 17
这是描述信息

News

How to maintain Extruder Screens

  • Categories:NEWS
  • Author:
  • Origin:
  • Time of issue:2021-08-13 16:56
  • Views:

(Summary description)Clean up the items on the Extruder Screens in time, and check the Extruder Screens regularly for damage.

How to maintain Extruder Screens

(Summary description)Clean up the items on the Extruder Screens in time, and check the Extruder Screens regularly for damage.

  • Categories:NEWS
  • Author:
  • Origin:
  • Time of issue:2021-08-13 16:56
  • Views:
Information

1. Clean up the items on the Extruder Screens in time, and check the Extruder Screens regularly for damage.

   2. When the vibrating Extruder Screens is out of service, use clean water to rinse in time to prevent the debris and drilling fluid flowing on the Extruder Screens from solidifying and blocking the screen holes. After drilling or stopping use, thoroughly clean all parts.

   3. When cleaning up debris on Extruder Screens, do not use sharp objects to avoid damage to Extruder Screens.

   4. Frequently check the fasteners of various parts, and fasten them in time if they are found to be loose.

   5. Check the Extruder Screens fixing bolts in time to ensure that the Extruder Screens are evenly tightened and the tightness is appropriate, otherwise, the service life of the screen will be reduced.

   6. The excitation motor is not allowed to be replaced at will, otherwise, the characteristics of Extruder Screens will change.

   7. If the excitation motor does not rotate after the power is turned on, the power should be cut off quickly to avoid burning the motor.

   8. When Extruder Screens meet the needs, the two Extruder Screens should be used alternately to extend the service life of the equipment.

   9. According to the coverage length of the drilling fluid on the screen surface (75%-80%), select the number of screen meshes.

   10. When using Extruder Screens, the motor is filled with JS-4 high-temperature noise-reducing lithium grease once every three months. When filling the grease, prevent foreign matter from entering the oil hole. The oil filling amount is 30-40g per bearing.

   11. When the amount of oil in the manual oil pump decreases, the oil pump will not work normally, and 10# oil should be injected in time.

   12. When moving and transporting, the screen box must be fixed and placed horizontally to prevent the Extruder Screens from being deformed due to severe vibration, which will affect the service life of the Extruder Screens.

Extruder Screens For sale, reliable quality, competitive price, factory direct sales

Keyword:

Copyright·Anping Senming Wire Mesh Co., Ltd 冀ICP备11013701号-1 www.300.cn