language
中国
韩国
韩国
韩国
韩国
韩国
11 11
12 12
13 13
14 14
15 15
16 16
17 17
这是描述信息

News

What is the filter cleaning method for customized Basket Strainers?

  • Categories:Basket Strainers
  • Author:
  • Origin:
  • Time of issue:2021-06-25 14:06
  • Views:

(Summary description)If you want to clean the customized Basket Strainers filter smoothly, you need to disassemble it. Some customized Basket Strainers are not easy to remove. You need to carefully remove the flange cover, and then take out the filter carefully. . The user needs to pay attention to that the parts or screws taken down during disassembly must be placed in a place not to be lost, otherwise it cannot be installed.

What is the filter cleaning method for customized Basket Strainers?

(Summary description)If you want to clean the customized Basket Strainers filter smoothly, you need to disassemble it. Some customized Basket Strainers are not easy to remove. You need to carefully remove the flange cover, and then take out the filter carefully. . The user needs to pay attention to that the parts or screws taken down during disassembly must be placed in a place not to be lost, otherwise it cannot be installed.

  • Categories:Basket Strainers
  • Author:
  • Origin:
  • Time of issue:2021-06-25 14:06
  • Views:
Information

Customized Basket Strainers are very common in production and life, but after using this product for a period of time, there will definitely be a lot of stains. If it is not cleaned up in time, it will affect the use effect. So how do you clean the filters of customized Basket Strainers? Let's learn about it together!
1. If you want to clean the customized Basket Strainers filter smoothly, you need to remove it. Some customized Basket Strainers are not easy to remove. You need to carefully remove the flange cover, and then take the filter carefully. take out. The user needs to pay attention to that the parts or screws taken down during disassembly must be placed in a place not to be lost, otherwise it cannot be installed.


2. Put the disassembled filter screen in water for cleaning. In order to clean up the stains on the top, some users directly use boiling water to soak. This is definitely not the correct method. Too hot hot water will scald the screen surface, which may cause damage. Severe deformation occurred, making it unusable. The temperature of the water used should not be too hot or too cold, just warm water. If you have a detergent, you can pour some detergent into warm water so that the stains on the surface will be soaked. Soak for about ten minutes to see if the stains on the mesh surface are cleaned. If there are stubborn stains, you can gently brush with a soft brush to clean the dead corners. Then, you need to dry the clean and clean customized Basket Strainers filter. It should not be exposed to the sun or baked on the stove. Both methods may cause the surface of the customized Basket Strainers to be baked and deformed. It can be dried directly in a ventilated place, or it can be dried with a hair dryer.
3. Install the customized Basket Strainers filter back, and install the flange cover. All parts and screws must be tightened to avoid potential safety hazards during use.
The above is how to clean the filter of customized Basket Strainers.

Keyword:

Copyright·Anping Senming Wire Mesh Co., Ltd 冀ICP备11013701号-1 www.300.cn